Not yet rated
Loading ...The Radiator Placement
tinytomlogan
I needed to start thinking about getting the radiator in the bottom, so I got some Thermochill templates and masked up where I needed to cut and set about hacking into my case :O
Then got the drill out with a 114mm holesaw and set to it. The masking tape actually helped keep the pilot in place which was nice.
Now I’ve got the holes in place to mount the rad I’ll jump to me trial fitting
the radiator. These fans are just for the mock up and will not be used in the final build.
So these are just for you (and me) to have an idea of what it will look like when finished.
1500W PSU needs a bit more support… :O Lucky it’s only for testing!
No Comments
This article has no comments yet.
Make a comment