Not yet rated
Loading ...Oh Noes
bentleya
15th march 2008
my leds came today, 100 red, 100 white and 100 uv, there all came with resterias and i brought them of ebay, from a ebay shop that is in china
now on to today i am going to be doing some work on the divider plate, so to start i have marked out holes for bolts and leds
i will be drilloing 6 holes for leds using a 3mm drill bit and 4 holes for the bolts using a 5mm drill bit
i have centre puched ready for the drill bit
all the holes drilled, i got scared when i was driling for the bolts as it was right on the bend but it was fine
next up i have cut out w section of red perspex, one to go over the tubing holes and one to go over the fan holes
first up i will drill 2 5mm holes for bolts in the tubing perspex
and 4 5mm holes for bolts in the fan area
i am mking 9 6mm holes at the back of the divider plate for stero jacks, i have marked it out below
ready to be drilled
it was all going to plan till i drilled the last hole, i had to change the batteriy on the drill and was to much power and a cracked the perspex, ooo nose i really feel like C***
so i will be making number 3 tomoz but i’m not sure hoe much perspex i’ll have to do it, i have decided to deign all my perspex on sketchup and get it laser cut out as i have made it twich by hand and it has gone wrong
till next time happy modding
This article has no comments yet.